The Only Encapsulant that Seals Non-Friable Black Mastic and Primes for New Paint, Epoxy, Tile, Leveling Cements, and more. 1 Gallon (Light Grey)

PerfectPrimer safely seals and primes difficult and dangerous substances such as asbestos mastic, black mastics, cutback glue, failed soy gels, and lead paint without disturbing them, and is the ultimate stain- and odor-blocking primer/sealer. PerfectPrimer eliminates the need for removal of mastics by grinding or sanding, or expensive, messy, and dangerous treatments such as soy gels, mastic removers, and glue strippers. PerfectPrimer is a latex bridging encapsulant as defined by the EPA guidelines for encapsulating asbestos-containing materials.

How to use PerfectPrimer: First, remove any debris from the floor such as dust, rubble, and any loose or broken tiles.

Then, wash floor with TSP solution or degreasing dish soap and rinse with clean water. Apply first coat of PerfectPrimer. Allow 12 hours to dry. If floor requires patching, apply patching cement and/or acrylic caulk as needed. Apply second coat of PerfectPrimer. Allow 72 hours to cure. Keep surface clean. Avoid walking on primer with rubber shoes. Avoid getting priming surface dusty or dirty. Finally, apply your paint, epoxy, modified cement, or adhesives. PerfectPrimer covers 200 square ft. per gallon. This number includes the required two coat application.

PerfectPrimer primes and seals over many surfaces, materials, and glues, including:

• Coatings left behind after asbestos abatement projects
• Concrete (sealed, painted, or clean)
• Wood
• Tile (including VCT, asbestos, vinyl, and tile glue)
• Paint
• Carpet Glue
• Epoxy
• Sheetrock
• Metal
• Sheet vinyl
• Asbestos or lead-painted shingles
• Popcorn ceilings with asbesos fibers
• Most indoor and outdoor construction materials

PerfectPrimer primes surfaces for your choice of:

• PerfectPrimer Products
• Epoxy
• Acrylic latex paint
• Decorative cements
• Thin-set + Tile
• Self-leveling cement
• Glue down / self-stick flooring
• Glue down engineered wood

PerfectPrimer is the only safe, legal, and effective method of treating asbestos mastics within EPA guidelines, without the lengthy, expensive process of asbestos abatement.

Features and Benefits:

• Seals cutback glues and asbestos mastics without the need for scraping, grinding, solvents, soy gels, or removal of mastics
• Meets EPA safety guidelines to seal mastics without disturbing them
• Safe and Nontoxic; no harmful VOCs
• Saves time and money
• No mixing required
• Cleans up with water

How to use PerfectPrimer:

1. Remove any debris from the floor such as dust, rubble, and any loose or broken tiles.
2. Wash floor with TSP solution or degreasing dish soap and rinse with clean water.
3. Apply first coat of PerfectPrimer. Allow 12 hours to dry.
4. If floor requires patching, apply patching cement and/or acrylic caulk as needed.
5. Apply second coat of PerfectPrimer. Allow 72 hours to cure.
6. Keep surface clean. Avoid walking on primer with rubber shoes. Avoid getting priming surface dusty or dirty.
7. Apply your paint, epoxy, modified cement, or adhesives.

PerfectPrimer covers 200 square ft. per gallon. This number includes the required two coat application.